Please enjoy the holiday season with your loved ones and we look forward to seeing you all in 2015! Holiday Season: Closed: December 24 - January 2 - Please get all orders to us by 3pm on December

Heule Tool Corporation is now an official member of AMT – The Association For Manufacturing Technology! In order to become a AMT member a company must obide by the AMT guidelines of being a "U.S.-based firm who design, build, sell, and service

Heule Tool is now hiring for two positions: Technical Sales/Application Engineer Systems & Finance Analyst Please click this link to learn more about them.   Send resumes to

Happy Holidays from all of us at Heule Tool! Please enjoy your time with friends and family!   Please keep in mind the following during the holiday season: Closed: November 27 - 28 - Please get all orders to us by 3pm on November 26 Closed: December

Please keep in mind the following during the holiday season: Closed: November 27 - 28 - Please get all orders to us by 3pm on November 26 Closed: December 24 - January 2 - Please get all orders to us by 3pm on December

We are really excited to announce that we have been super busy working on a new Heule Tool Full Line Catalog! This catalog is a little larger than our last, adding in our new tools MicroCOFA, VEX-P and BSF. We are hoping to get this out to the printer next week and on your desk soon after.

Stay tuned!!!

Come out and see what's new with Heule Tool at the Dayton AMTS Show this Wednesday and Thursday in Booth 1108!

Wednesday 10am - 7pm

Thursday 9am - 5pm

http://www.daytonamts.com/ for more information, see you all there!

Now after IMTS has gone and passed, all leads should have been notified. If you reached out to us at IMTS and have not yet heard from us or from your Heule Tool territory manager, please contact us directly and we will make sure you are immediately assisted.

Cutting Tool Engineering stopped by our booth at IMTS and shot a video of our North American President, Gary Brown, briefly speaking about our new products. Take a look!

Video Link

Hurry to W-1352 to visit HEULE TOOL as IMTS is almost over! They close their doors tomorrow (Saturday) at 5PM.

We are off to IMTS! We hope to see you all there and share what we have been up to recently.

Remember to check us out at W-1352!

9 more days until IMTS.... 9 more days until IMTS... 9 more days until IMTS... I hope you all are ready for it!   Remember to come see us at W-1352 and see what's going on with Heule and how we can help you

We are happy to announce that our BSF brochure is finally finished, just in time for IMTS! 17 more days, sometimes things just come together at the last minute and we are ok with that.

Be sure to grab your copy at our booth W-1352, can't wait to see you all there!

Competitive Solution for Back Spot Faces and Counter Bores of up to 2.3xd HEULE PRECISION TOOLS will launch their latest development at IMTS 2014. The new BSF tool extends their range for automated high volume production of back spotfacing and counterboring.

Competitive Solution for Back Spot Faces and Counter Bores of up to 2.3xd HEULE PRECISION TOOLS will launch their latest development at IMTS 2014. The new BSF tool extends their range for automated high volume production of back spotfacing and counterboring.

"...To make this as labor free as possible and save a tool change, look into Heule Vex-S drill/chamfer tools. We use one on a flanged shaft we make in 65-45-12 ductile. Each shaft has ten M8 tapped holes and we have run a couple thousand parts without ever

In case any of you missed us at BIG Kaiser's Productivity Day on Tuesday June 24, Gary Brown, our North American President was there speaking amoung other great guest speakers. The agenda was as follows: Heule Tool: Innovative Technologies for Countersinking

PRODUCTIVITY DAY!Connecting Suppliers for Optimal Tool Setup & Cutting ConditionsJune 24, 2014 • 8AM-5PM • BIG Kaiser Headquarters — Hoffman Estates, Illinois Heule Tool is excited to announce that we will be participating in BIG Kaiser's

"...I haven't used the Heule tool on a radius yet, but I have used it on a really tough/hard mystery steel (Turkish construction equipment wheels) on flat surfaces and it worked great, lasted a long time too..." -PracticalMachinist.com

We have had the pleasure of having two great people join us this week in America from Heule AG in Switzerland. We always enjoy their company and love showing them around to visit customers and solve applications. If you didn't get a chance to meet with them,

Competitive Solution for Back Spot Faces and Counter Bores of up to 2.3xd HEULE PRECISION TOOLS will launch their latest development at IMTS 2014. The new BSF tool extends their range for automated high volume production of back spotfacing and counterboring.

What is your company's favorite way to advertise that you've found to be the most effective and efficient? Also, what is the best way to reach you as a consumer?

We are finalizing plans for our 2014 IMTS booth (W-1352), what new products are you excited to see???

Combination Drill with Front & Back Chamfering of Through Holes • High performance solid carbide drill tip combined with patented SNAP chamfering system • New VEX drill geometry for better chip control • Quick and easy drill tip and

HEULE at M.A.X. Stockholm Come Visit our Distribution Partner KOMET SCANDINAVIA from 03/18/14 to 03/21/2014 who will be exhibiting at M.A.X. in Stockholm, Stand

HEULE at INDUSTRIE 2014 in Paris Come visit our distribution partner Boulland at booth 5-H97 03/31/14 to 04/04/2014

We hope you all had a chance to visit us at EXPOMAQ last week in Leon, Guanajuato, it was a great show and we look forward to speaking with all of our contacts shortly.   EXPO MANUFACTURA starts today and ends Thursday the 6th, please stop by booth 955

Heule Tool is proud to announce their involvement in two more shows this year in order to support our brand in Mexico. For further information, click on each picture or contact us for more information. Our Territory Manager for that area: Jose Gamboa,

Please take a moment to check out our BSF video here, we had added a few photos and a PDF with our typical parts as well. We are very excited about this tool and are going to showcase it at IMTS in September this year.   If you have any questions on

Everybody here at Heule would like to wish you all a happy new year and we look forward to working with you in 2014! We hope you all had a fantastic holiday, we know we did here! We are back to normal operating hours, 8am - 5pm est.

Check out the January issue of Cutting Tool Engineering where Heule Tool is featured in their "Joint Forces" section on page 40, or you can view here. January 2014 / Volume 66 / Issue 1 Joint Forces By Alan Richter, Editor Combination