Skip to Main Content

Testimonials

Swiss Precision Since 1961

I really appreciated all the help you have given me with [the COMP tool]. this has been the first time I have worked with HEULE Precision Tools and you have given me a great example of why I would want to do business with HEULE in the future.

 

- Manufacturing Engineer in the Automotive Industry

It [HEULE BSF tool] has automated a process for me which was very labor-intensive. It has freed up operator time because I know when I get past a certain feature, it is lights out machining.

- Mill Department Manager in a Machine Shop

"...To make this as labor free as possible and save a tool change, look into Heule Vex-S drill/chamfer tools. We use one on a flanged shaft we make in 65-45-12 ductile. Each shaft has ten M8 tapped holes and we have run a couple thousand parts without ever changing the drill tip or chamfering blade. Best of all, we never reach for a hand drill to chamfer a tapped hole. Your setup will have to have enough clearance beneath the parts to allow the chamfer blade to reach the bottom side though. The one we use is 2 x Dia..."

 

- practicalmachinist.com

"I have used it (a HEULE tool) on a really tough/hard mystery steel (Turkish construction equipment wheels) on flat surfaces and it worked great, lasted a long time too..." 

 

- practicalmachinist.com

So far the tool and inserts are working out great. Thank you for helping [our company] stay on the cutting edge and competitive.

 

- Manufacturing Engineer for Knife Manufacuturer

Our production is up and tool cost is down.  The COFA tool made a big difference on this part.

- Manufacturing Engineer in a Machine Shop

Excellent results. We were really impressed with how nice the spots and side
wall looked [with the BSF tool].

- Manufacturing Engineer in a Machine Shop

The BSF tool performed so well that I have now cut out the other five axis roughing, saving us three operations in total and 15 minutes in cycle time.

- Manufacturing Engineer in the Aerospace Industry

We are now drilling and chamfering both sides of the part [with Vex-S] faster than we can tap it.

- Manufacturing Engineer in the Automotive Industry

We got the consistency we needed to keep our production going AND saw a $45,000/yr savings in time and labor.

- Manufacturing Engineer in the Automotive Industry

- Manufacturing Engineer in the Automotive Industry

After seeing the parts made by the HEULE tool, our customer will no longer accept hand benching of their parts.

- Manufacturing Engineer in the Automotive Industry

We saved over $60,000 just by eliminating a second machining operation.

- Manufacturing Engineer in the Automotive Industry

It is really helping our process and the guys running the machine love it!

- Manufacturing Engineer in the Energy Industry

[The GH-Z] increased production and shortened a 15 hour operation to only 2.5 hours.

- Manufacturing Engineer in the Energy Industry

So far we've run 420 counterbores, up from 32 on the old tool, and we've only indexed the two-sided inserts once.

- Manufacturing Engineer in the Energy Industry

We've had the tool in production with no problems. Our scrap rate went from approximately 400 pieces/month (due to chamfer issues) to less than one. 

- Manufacturing Engineer in the Heavy Equipment Industry

By going with the HEULE SOLO Back counterbore tool, our end user documented a $13,249.55 per machine yearly cost savings. With 5 machines, this equals $66,247.75 annual cost savings, which is on top of the 181.33 hours per year of time savings. 

- Tool Distributor for the Automotive Industry

Copied!
^TOP
close
ModalContent
loading gif