Case Studies

Saving Cycle Time While Drilling and Deburring Aluminum

Posted on: September 26, 2017
Tags: Aluminum, VEX-S, Drilling, Aerospace, SNAP, Deburring
aluminum deburring, aluminum shavings, drill and deburr tool

Download PDF

Challenge:

Drilling holes in aluminum produces long chips that wrap around the tool, making it necessary to debur the holes in a separate operation. This manufacturer in the aerospace industry was looking for a solution to reduce cycle time.

 

Application Details

  • Bore: Ø11.0 mm
  • Bore Depth: Ø2.0 mm
  • Material: Aluminum

Solution: 

To effectively perform this application and cut cycle time, we chose the VEX-S tool for the drilling operation, with internal coolant and bore depth 1xd, along with the SNAP tool for the deburring operation. Both tools were coated with DLC for use in aluminum. 

 

Machining Parameters:

Speed: 5000rev/min

Feed: 0.1 mm/rev

Cooling: internal cooling

Results:

With the VEX-S and the correct cutting data, it became possible to machine thin aluminum profiles without the risk that the shavings interfered and stalled the process. The customer was very happy with a shortened cycle time while producing a higher quality part.

 

Interested in the VEX-S combination drilling tool? Visit the VEX-S product page for more info. 

Need help selecting a tool? Visit our online Tool Selector and go to the Locate Agent page on our website to find your local technical sales representative. For more assistance, contact us at info@heuletool.com or 513-860-9900 and we'll be happy to point you in the right direction.