Case Studies
Case Studies
Entry Tags (33 found)
Aerospace Aluminum Automotive Back Counterboring Brass BSF Cast Iron Chamfering Cobalt-Chromium Alloy COFA COFA-X Composite Counterboring Countersinking Cross Hole Deburring Deburring DEFA Drilling Energy GH/E Heavy Equipment Inconel Medical Nickel Polyether Ketone (PEEK) Precision Machining SNAP SOLO Spotfacing Steel VEX-P VEX-S X-Bores
Combining Drilling, Deburring, Chamfering, and Countersinking on an Aluminum Wheel Valve Hole
A manufacturer producing approximately 800,000 aluminum wheels for the automotive industry each year was looking for a more cost-effective and efficient solution to produce valve holes that would not ...

A high-volume motorcycle manufacturer that was producing 480 lower fork arm brackets per day was seeking an efficient back counterbore tool. Their current tool was having issues with tool breakage an...
.png)
Deburring Bores in Composite Aircraft Parts
There are two major challenges to machining composites: one is to cut the fibers neatly without fraying; the other is that the abrasiveness of the material leads to heavy wear on the cutting edge of t...

Deburring Bores on Hard-to-Reach Irregular Surfaces
A manufacturer of V-8 crankshafts was faced with the challenge of deburring a main bore that broke into seven different surfaces, some of which were angled/irregular. They needed a tool solution that...

A precision machining shop focused on earth moving, rail, highway engines, power generation, and construction markets was using another company’s back spotfacing tool, but came to HEULE after continuo...

Saving 34% Cycle Time on a Sprocket Wheel
A subcontracting company to the automotive and the fittings industry produces a range of components such as flanges, sprockets and drive shafts and was looking for a solution to reduce cycle time ...

A subcontractor to the automotive industry used to deburr a fork laboriously by hand. The fork is part of the steering column. Faced with the problem that the manual deburring was too time-consuming a...

An artificial joint manufacturer in the medical technology field was not happy with the existing manual deburring solution of a crossbore in a knee replacement part and the quality of the parts being ...

The customer was looking for a solution to deburr/chamfer bores of back implants for the medical industry. The material, PEEK (Polyether ketone), posesses a very high continuous service temperature, s...

A manufacturer of hydraulic components and fittings was looking for a more efficient and safer deburring solution for the cross hole of a ball valve. The goal was to automate the process and eliminate...